Button-Up Baby Romper FREE Pattern!

Today I have a FREE baby romper pattern to share with you! button-up romper

This button-up romper gives you the polished look of a collared shirt but it’s still cool and comfy for baby to wear
IMG_8352

I’m participating in Romper Week over at Sewing Mama RaeAnna and wanted to have something super fun to share with all of you. What’s more fun than a free pattern right?!
unnamed (1)

As part of Romper Week there is also sew off and a giveaway! Head over to Sewing Mama RaeAnna to enter and to get all the details :)

unnamed

This button-up romper is Levi’s outfit for the 4th of July this year and it coordinates with Will’s shirt that I shared last week. I love rompers on babies!
Baby Romper Pattern

Does a baby in your life need a dapper little romper? I’m giving this one away! It’s also a size 6 months and sewn up with lots of love :) Come join the Peek-a-Boo Facebook Group for your chance to win it! Just find the photo and comment for your chance to win!
***Update: winner has been chosen

IMG_8356

Now let’s sew up a romper!

Download Your FREE Pattern

This pattern is currently available in size 6 mos. A full pattern with sizes newborn-4t and a long pants option will be available for sale in the Pattern Shop soon :) This size will stay here for you to enjoy even after the full pattern is released
***Update: Pattern is now available! Get your copy here

Now that you have your pattern printed, tape it together along the dashed lines and let’s get started! Catch the tutorial after the jump

Materials List:
- 3/4 Yard Fabric
- Lightweight Fusible Interfacing
- 4 Buttons/Snaps for front placket
- 3 to 4 snaps for inseam
- Single Fold Bias Tape

This project has a lot of steps but it really sin’t super time consuming to sew so don’t panic :) Use a 1/4″ seam allowance unless otherwise noted

1. Add a 1″ strip of interfacing to each front romper piece 1/4″ in from the placket edge. Your placket is the portion up at the top. Finish the center front seam/bottom edge of the placket with a serger or zig-zag stitch. While you have your interfacing out add a piece of interfacing to the front snap placket, 1 back snap placket and 1 collar piece.  IMG_8296

2. Fold each side of the placket over 1/4″ and then another 1″ towards the wrong side of the romper and press flat. DO NOT SEW IMG_8297

3. Press the bottom edge of each sleeve up 1/4″ and then another 1/2″ and press flat. DO NOT SEW IMG_8299

4. Press the top edge of the pocket over 1/4″ towards the wrong side. Press the top edge over 1/2″ towards the right side and topstitch the folds in place 1/2″ in from the sides.  Turn the top of the pocket right side out and press the sides and bottom edges in 1/2″. Topstitch the top of the pocket.
IMG_8304IMG_8306

5. Topstitch the pocket to the left shirt front along the sides and bottom edges
IMG_8307

6. With right sides together (RST) sew the 2 back pieces together along the center back seam/back rise. If you’d like you can topstitch the seam allowance to either side of the back piece.
IMG_8300 IMG_8312

7. With RST sew the 2 back placket pieces together along the outside and bottom edges using a 1/4″ seam allowance. Trim your seam allowance, turn right side out and press flat IMG_8302  IMG_8313

8. With the back placket on the right side of the fabric sew the raw edge of the placket to the back inseam using a 1/4″ seam allowance. The placket will end 3/4″ before the raw edge of the romper (this leaves room for the hem).
IMG_8314

9. With RST sew the collar pieces together using a 1/4″ seam allowance along the 2 sides and outside edge. Trim the seam allowance, turn right side out, press flat and topstitch IMG_8303 IMG_8311
10. With RST sew the left and right front pieces to the back at the shoulder seams. If you’d like you can topstitch this seam allowance to the front of the romper.  IMG_8315 IMG_8316

11. Center the collar on the neckline and sew in place with a 1/4″ seam allowance. Your placket should be unfolded during this next series of steps.  IMG_8317

12. Fold the placket back along the pressed fold line from step 2. The collar will now be underneath the placket
IMG_8320

13. Unfold your bias tape. With RST sew along the fold line in the bias tape right on top of your stitching line from step 11. Make a series of little snips into the seam allowance so it lays well in the next step.
IMG_8321

14. Flip the collar up and turn the front placket right side out. You will now have a beautiful finished corner for the top edge of the placket. Press flat. Bring the bias tape down so the seam from step 13 is covered and topstitch in place. Now is a great time to add a tag if you have one :)
IMG_8322

15. Line up the center front edge of the left and right front pieces and sew together using a 1/4″ seam allowance. Go straight up and stop 1/2″ past the start of the placket. Do not turn and sew any portion of the placket
IMG_8324

16. Refold the placket pieces and press flat. Topstitch each side of the placket (you will need to move things out of the way a bit as you sew). On the left front piece (or right if you’re sewing for a girl) add a line of topstitching along the center front edge.
IMG_8328

17. Overlap the placket pieces so everything is laying flat. Starting at the crotch topstitch along the center front seam up to where you left off in the previous step. Sew over to the far stitching line, turn and go down 1/2″ and then back to the center front line to secure the bottom edges of the placket pieces.
IMG_8333

18. Add snaps or buttons to the front placket. If you are using buttons do a horizontal buttonhole for the top button instead of vertical IMG_8334

19. Finish the outside edge of the front snap placket piece
IMG_8301

20. With RST sew the front snap placket piece to the front romper using a 1/4″ seam allowance. It will end before the bottom edge of the romper. Keep in mind that your “center front” seam is actually off to one side by 1/2″.  Clip along your seam allowance. Flip to the inside of the romper and topstitch in place along the seam and along the outside edge to keep it in place.
IMG_8335

21. With RST sew the sleeves into the armholes. If you want you can topstitch the seam allowance to the body of the romper.
IMG_8337IMG_8338

22. With RST sew up the sleeve inseam and romper side seam. You will need to unfold the sleeve hem while you sew this step.
IMG_8339

23. Refold the pressed lines of your sleeve and hem. IMG_8342

24. Fold the bottom edge of the romper up 1/4″ and then another 1/2″ and topstitch to hem.  IMG_8343

25. If you want you can also topstitch the seam allowance of the back facing to the romper IMG_8344

26. Add your snaps and you’re done!
IMG_8346

 

Related Posts Plugin for WordPress, Blogger...

Comments

  1. 7

    Linda says

    Could I ask what size snaps you used? I have a bunch of size 20 left over from my diaper making days and was thinking about using them if they weren’t too big.
    Thanks Linda

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>